Electrically Conductive 3D Printing
Break down design barriers and grow your business with Hyper Speed Material, available for you.
Upload your CAD files, Receive your customized custom Fused Deposition Modeling Electrically Conductive 3D Printing printing quote. Choose from a variety of process materials to suit your needs.
Electrically Conductive 3D Printing
Fused Deposition Modeling
[FDM] Electrically Conductive 3D Printing
Electrically Conductive 3D Printing offers high strength and exceptional layer adhesion, boasting superior physical and mechanical properties. It strikes the perfect balance of strength, adhesion, and speed, with 30% higher mechanical properties than standard PLA in terms of flexural strength, flexural modulus, and impact strength.
Electrically Conductive 3D Printing is suitable for the most demanding applications like UAVs, aircraft models, joints and drives.
Creality K1 – AI 600mm/s
12x
faster printer
Raice3D Pro3 150mm/s
2.7x
Previous generation printer (baseline) 60mm/s
Creality K1 – AI 600mm/s
Raice3D Pro3 150mm/s
3.3x
Previous generation printer (baseline) 60mm/s
Creality K1 – AI 600mm/s
Raice3D Pro3 150mm/s
3.7x
Previous generation printer (baseline) 60mm/s
Material Properties
Young’s modulus (X-Y)
4.1 KJ/m2
Tensile strength (X-Y)
Elongation at break (X-Y)
3552 Mpa
Impact strength
Walls
Supported Wall Thickness Min 0.2 mm
Supported Wall Thickness Min 0.2 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall.
Walls that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model.
Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.
Parts in File
Max
Up to 100 parts accepted
Design Guidelines
Bounding Box
Bounding Box Max
300 x 300 x 300 mm
Bounding Box Min
7x7x2 (mm)
The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model.
Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.
Accuracy
Accuracy +/-0.25 mm + 0.1%
For example: a product with dimensions of 50x50x100 mm can be 0.15 mm + 0.0015*100 mm = 0.3 mm bigger or smaller in any direction.
High strength and layer adhesion, Matte finish
Weaknesses – Minimal visible print layer lines for a polished finish.
Upload your CAD files, get a personalized Fused Deposition Modeling (FDM) Electrically Conductive 3D Printing printing quote. Select from a range of materials for your custom project. Experience the convenience of instant online quotes.
Color & Finishes
